Free lcd scrub iso#

If you see any spots, repeat step 1, and then do this again. Blow dry (with your mouth or a heat gun on low) the alcohol.

You should use enough alcohol that it leaves a wet film on the LCD.Дў. Wipe down the LCD in as few strokes as possible, as wide of a stroke as you can with your cleaning cloth or TP. Using a micro fiber or dust-free cloth, or even a soft toilet paper, put a liberal amount of the alcohol on your cleaning cloth and use 'flood-strokes' on the LCD in one direction ONLY. I've been there, rubbing on an LCD for upwards of an hour, only ending with the same grease smudges that I started with. And take note, scrubbing an LCD with a back-and-forth motion will only get you frustrated, just as the previous poster had mentioned. What works best for me is to follow this 3-step procedure. I could believe that continued cleaning with the alcohol could cause damage, however. I honestly don't think a 1-time cleaning using the 90% will cause a problem. I might change that back to a pre-mixed 50% solution, but the 50% does not remove grease as well. I normally use 90% Isopropyl Alcohol for cleaning everything on the smartphones and tablets that I repair. First of all, I had no idea that alcohol would damage the LCD. I came up with the perfect method of cleaning the LCD panel. I used to have this same problem, but not any more. Д¬leaning the screen while power is off has two advantages, 1stly, you can see dust better against a black background, and obvioulsy there will be less chance of shorting something out if liquid gets where it should not be. if you dont have a spray bottle, you can just pour a small anmount directly on your microfiber. Be sure to spray the microfiber, rather than the screen ( drips down into the internals are not good ). Дont use tissue or newspaper, paper towels, old socks or tee-shirts. Tap water can have minerals, salts, chorline, tiny grians of sand and other stuff you dont want on the screen surface.

Free lcd scrub iso#

If you use microfiber 50/50 Iso and DISTILLED water should be fine. I find the smaller atomizing bottles desgined for lens cleaner (like what you get for camera lens or eyeglasses) easy to carry in my geek bag, but DO rinse well prior to filling up with something safer than things designed for glass.

You REALLY should avoid anything that contains the likes of ammonia, acetone, toluene or ethyl alcohol, as these are solvents and while great at disolving oil based fingerprints, they are also quite good at disolving oil based plastics and removing Uv and other coatings on your LCD/LED screen ( glass covered screens have less issues with your windex type stuff, But most of these things still leave a bit of residue behind, which will require buffing out anyway, and any oilphobic, uva, glareproofing ect coatings are at risk with chemical ,or physical friction, for this reason use minimal pressure while cleaning ) so, IMO better to have the safest option on hand to aviod potenial mistakes when in a jam). homebrew something almost as good as follows. Well since we cant get the OMNICLEANZ here anymore.